You have acquired one of important components of good household appliances - cooking surface. Whether you will be able to connect it independently? You will be able if you have though the minimum experience with such devices. Adhere to the instruction as any mistake can turn back breakage of so delicate device. Availability in interior of your kitchen of the new operating cooking panel will be result of your correct and coordinated actions.
It is required to you
- - instruction for connection;
- - necessary tools.
Instruction
1. Read attentively the installation instruction of cooking surface before beginning process of its connection. You remember safety precautions during the work with difficult household appliances.
2. Make sure before installation of cooking surface that its operating voltage of power supply coincides with tension of the available network. In order that to learn it, use the table of the reference specifications which is on lower face of the cooking panel.
3. Turn off giving of tension and independently connect cables to supply circuit. Supply voltage of heating coils is 230 V of alternating current. The cooking surface successfully functions also from the alternating current main with voltage of 220 V. The cooking panel has to be connected to the alternating current main so that for shutdown of current there was device at which all poles with travel of contact not less than 3 mm are disconnected. It is possible to carry to such devices, for example, the circuit breaker from overcurrents, the shutdown device at earth leakage or the safety plug.
4. Use H05SS-F cable (180 °C) or any other, having higher characteristics for connection of the cooking panel to the alternating current main.
5. Execute connection as it is specified in the technical scheme. All connections have to be executed according to the scheme of connection. Connection of cables has to be carried out according to norms and rules. Connect ground cable to ground clamp. Screws of clips should be clamped carefully. The cable for connection has to be reliably fixed by clip for cable, and the casing - is closed by strong pressing (that it was recorded).
6. Remove all labels and protective stickers from the cooking panel to check its availability for service if the surface of the panel glass-ceramic. After connection of cooking surface to energy source make sure that all rings work. You will be able independently to check it, including each of them for short time for the maximum power. Surely check work of other functions of product, for example, blocking of the panel from children and indicators of residual heat.