To recover interior flower motives, it is possible to use one of set the technician of drawing the drawing on wall. The main thing that the surface has been prepared for work as interior paints.
It is required to you
- - interior paints;
- - brushes of different thickness;
- - solvent;
- - sticky paper for creation of cliches;
- - stationery knife, edges, scissors;
- - paper for forming of sponges;
- - foam rubber;
- - simple pencil;
- - eraser;
- - contour.
Instruction
1. Make pencil sketch of flower on the prepared wall. You can choose the simplified motive in which only a few pure colors are used, but this equipment allows to show the art talents therefore it is possible to draw difficult bud with the lobes wrapped or waving on wind.
2. Start coloring, use familiar to you and well mixing up interior paints. Perform work so as if you draw on the paper placed on easel. Begin work with upper part of the drawing not to grease with hand the applied paint, set aside little finger of working hand aside. For receiving shades of transition from one color to another, use palette.
3. Create the drawing in stained glass style. For this purpose represent the flower having clear boundary of lobes, stamens and leaves on wall. Circle them with paint or special contour, the main thing that width of the line was approximately identical on all parts. Leave before full drying.
4. Fill with paint surface of each part, you do not apply too large amount of paint that smudges were not formed on brush. Try not to apply color on contour. This way of dressing of interior is especially good if there is need to create the flower motive concluded in geometrical figure, for example, circle, oval or rectangle.
5. Use cliches, they allow to expedite flower motives without transitions from one color to another. On adhesive tape or special paper draw flowers with accurate contours of separate parts, cut areas which are subject to painting.
6. Paste paper to wall. Contract sponges from foam rubber. Coat not stuck zones, try not to get on adjoining properties. Leave for drying-out, remove auxiliary paper.