The extract is very necessary in kitchen as it is capable to purify air. It prevents distribution in smells, evaporations and the polluted air. Also thanks to extract the furniture does not become covered by disgusting greasy raid. It is possible to choose extract on the taste. The model range of this representative of class of air cleaners will please with the variety.
- Extract, air ducts, tape measure, level, drill, dowels, screws, the hammer, construction pencil, the perforator, drill on concrete for the perforator (SDS+).
1. If you connect air duct to the general with neighbors to ventilating duct, then kitchen smells will return to you or to leave straight – to neighbors since the mine can pass 2-5 times less air, than your extract will banish. In that case it will not be able to be cleaned, continuing to incorporate the polluted air. Alternative to connection of air duct to the general ventshakhta – conclusion to the street. Having secured with coordination with local governments, cut through opening in wall. Use the perforator for these purposes, having established drill on concrete.
2. Upon purchase of extract pay attention to air duct spare parts. Their diameter has to correspond to the section of the air shaft of the room. The air duct should not be strongly curved and too long. The umbrella of extract has to be on width not less cooking surface to delete smells as it is possible more effectively.
3. For extract there has to be separate electrical outlet. It is necessary to establish it during repair in kitchen. If such socket has not been built earlier in, then, establishing new, lay wires in cable channel.
4. Arm with the level and tape measure and make marking. Put with construction pencil of tag where the extract will fasten. From extract to cooking surface has to be not menee70 cm, and to gas-fire - 80 cm.
5. Drill or the perforator in noted places drill for opening dowels. Hammer dowels with the hammer, fix by bolts support on wall. On support establish extract. Do not put on casing yet. By means of adjusting bolts correct the provision of extract. It has to be established strictly horizontally.
6. Now connect air duct to ventilating duct. If the air vent is located opposite or at quite long distance from plate, lay to it additional box. It is desirable to hide them over hinged kitchen cabinets. Execute all joints hermetically.
7. Upon completion of installation of air ducts and extract establish casing and fix it, having adjusted on height. Make trial start, for this purpose connect extract to the power supply network.