Protection and capture under protection of the dwelling became relevant more than ever. But not each family is able to afford to pay every month for services of private security. Therefore installation of intruder alarm by own efforts can become optimal variant.
It is required to you
- - sensors for all boundaries of protection (magnitnokontaktny on the windows and doors reacting to opening and closing; motion sensors; the acoustic sensors reacting to sound of the broken glass; smoke sensors; temperature sensors);
- - siren;
- - controller (any, firm which was pleasant to you);
- - cable (wires).
Instruction
1. Think over how to ensure safety and inaccessibility of the dwelling so that operation of the alarm system was successful. Make the plan of arrangement of sensors of the alarm system.
2. Be defined where it is worth installing the equipment. It has to be imperceptible for expected robbers. Install the controller with the accumulator as it is possible further from outer door, in the place, inaccessible for foreign people. Establish siren, on the contrary, at entrance that in case of penetration it could deafen and frighten at once.
3. Decide how the cable will be laid. In case in the apartment there is just repair, it is the best of all to hide cable in wall. For this purpose it is necessary to cut through special grooves. If the ceiling is closed by hinged or stretch ceiling - fix cable under it. Do not forget to leave distance at least in twenty centimeters between cable of the alarm system and wires with electricity that hindrances in operation of the security equipment were not created. When repairs are not made, you should make cable channel or strob.
4. Execute wire routing. That is connect the controller wires to each sensor. If you have no special cable for intruder alarm, then normal computer will approach.
5. Program the controller. Attentively study the instruction to it, especially subject about the first connection. As a rule, the principle of programming is very simple and will not be any difficulties. Following the instruction, establish the correct settings.
6. Connect all sensors and siren to the controller. Schemes on connection are described in the instruction and do not demand special professional skills.
7. Check work of system. Turn on the controller, check operation of all sensors. Train all family members in handling of the alarm system.