After you have bought complete kitchen, there is question of its installation. It is recommended to begin work with hinged cabinets. In advance prepare step-ladder. It surely is useful in this hard business. You can independently hang up cabinets.
Instruction
1. Surely on wall draw arrangement of cabinets. At the same time consider all roughnesses of wall. Whenever possible they need to be liquidated. For this purpose use hard putty or plaster. For check of walls use level. Surely note all roughnesses on wall. When mounting hinged cabinets sometimes it is necessary to use wedges. With their help it is possible to fill slots and to level corners.
2. Further pay attention to corners. They have to be straight lines. For check it is recommended to use the carpenter's square. The gap should not exceed 6 mm. If you design P-shaped kitchen, then measure distance between opposite walls in several places. It will help you to make sure of parallelism of walls. After that note arrangement of wall border. Measure 141 cm from ceiling and draw line. It will designate bottom edge of hinged cabinets. The wall border will be at this place.
3. Use only those fastenings and screws which are suitable for your walls. Make openings. If necessary insert dowels and fasten one of screws half. Now it is possible to pass to installation of angular cabinet. Hang up fastenings on screw. Level cabinet on level. Twirl screws, but not up to the end. Further you can pass to installation of the following hinged cabinet.
4. After you have established all hinged cabinets, fix all screws on wall. The wall border can be removed. It is not required any more. It is not recommended to twist screws up to the end, the high cabinet is not established yet. It will be so simpler to see whether all cabinets are correctly established. If in kitchen there is extract, then before installation of cabinet under ventilating ducts it is necessary to cut openings. For this purpose it is in advance necessary to execute exact marking.