Fairly it is considered that it is easier to glue flizelinovy wall-paper and more conveniently to use, pasting of such wall-paper assumes putting glue only on wall, and after drying wall-paper on flizelinovy basis can be painted safely.
Instruction
1. Dissolve glue for flizelinovy wall-paper, following the instruction of the producer specified on packing.
2. Begin pasting of wall-paper from room corner, having drawn on wall by means of the level or plumb the vertical line to sustain further equal joint.
3. Cut strip of wall-paper according to wall height, having left small stock. If the structure of wall-paper assumes observance of the drawing, do not neglect it is on joints all discrepancies will be visible.
4. Apply with the roller on wall glue at the rate of pasting of several strips and begin to paste the first canvas, strictly adhering to the line which you have drawn. The upper part of canvas has to have small blousing on ceiling which then will be cut off.
5. By means of the wallpaper palette smooth canvas, without allowing formation of swellings. Working thus, paste the first canvas. Apply the wide painting palette in joint between wall and ceiling and accurately cut off surplus of wall-paper, having carried out in the area of the palette by sharp painting knife.
6. Apply the second canvas observing if it is necessary, the drawing. Paste the second canvas, strictly watching joint – wall-paper should not lay down with an overlap or form joint. Iron joint the roller for joints and remove the acted glue. Cut off surplus of canvas.
7. By the same principle paste over the rest of wall with wall-paper. Be attentive, pasting wall-paper on corners – in case of formation of "wrinkles", make accurate cuts painting knife, and, having let out the air, carefully smooth wall-paper.