How to make bed attic

How to make bed attic

In the conditions of the small one-room apartment even to small family of three people it becomes already rather small. The child needs more place for games, there is need to allocate it separate berth thereby to save part of space. To solve this problem, build to the child bed attic. And let it will be not just bed, but also sports complex in miniature. For this purpose it can be attached directly to bed.

It is required to you

  • - two boards with a section of 40х140 mm and 247 cm long everyone;
  • - board with a section of 20х140 mm and 171 cm long;
  • - board with a section of 20х90 mm and 171 cm long;
  • - two bars with a section of 40х40 mm and 88 cm long everyone;
  • - two bars with a section of 40х60 mm and 157 cm long everyone;
  • - two bars with a section of 40х60 mm and 80 cm long everyone;
  • - veneer sheet dimensions of 88х150 cm;
  • - eight shanks from shovels;
  • - joiner's glue (for example, "Moment joiner");
  • - drills, dowel and self-tapping screws.

Instruction

1. In boards of 40х140 mm make grooves of 2.5 cm in depth for crossbeams at distance of 25 cm from the center of everyone by means of special drill. Diameter of openings ideally has to equal to diameter of shanks, but as to find such big drill is extremely problematic, it is possible to pare down shanks sharp knife to the necessary diameter.

2. When grooves and shanks it is finished, attach one board to wall, miss the mark groove in it with joiner's glue and insert crossbeams shanks.

3. Now put vertically the second board, similarly miss the mark with glue grooves and move, combining crossbeams with grooves. When the last crossbeam rises on the place, properly knock opposite to each of them to fix them on places.

4. Now, when all crossbeams are on the places, fix the second board to ceiling and floor. The ladder is ready now.

5. Further fix at the necessary height on perimeter of future bed bars. Those which go on the wall you fix directly to it. From above put veneer sheet, press down it bars and fix by self-tapping screws.

6. Board of 20х140 mm close all faces of bars. Attach the last board at height, convenient for you. Here the main thing is to make slot between boards rather small that there the child's head could not get.

7. The bed is almost ready. Now to its zashkurita in the right places small abrasive paper that the child was not wounded. The last step it is possible to paint and varnish bed.

Author: «MirrorInfo» Dream Team


Print