The main advantage of bath consists in steam room. But also internal arrangement of the bathing room is not less important. Benches give to bathing procedures additional comfort and cosiness for rest. It is the best of all to make bench for bath of waterproof species of wood which will serve to you not one year.
It is required to you
- - bars;
- - abrasive paper;
- - levels;
- - wooden chopik or corrosion-proof fixture;
- - hammer.
Instruction
1. Benches in bath happen different types: step and two-story. They are on perimeter of all steam room or at one wall. Step are one above another – top has to be wider. On it are located in lying and sitting position. Two-story shelves climb up ladder. The distance between bench and ceiling has to be 110 cm.
2. For small bath make wide and big bench. For such bath it is better to make not the stationary, but rental shelf. It is easier to wash and dry it.
3. Mount benches for spacious bath in 2-3 tiers. Length of the top tier – 180 cm, width – 65 cm. The lower tiers – 50х90 cm.
4. The choice of wood for production of this subject for bath – very important point. The necessary requirement – small heat conductivity and high moisture-proofness of wood as it is necessary to lie and sit on them at temperature above room.
5. The following requirement – high strength and resilience to splitting and splitting of wood. The most suitable material for this product are boards from poplar, oak, aspen and linden which when heating do not emit pitches, quickly dry and do not burn skin at contact with it. Benches from these breeds of wood strong and pleasant for skin.
6. Decide on type of bench necessary for you. Make frame of bars. On frame fill narrow cross levels. It is possible to place levels and lengthways.
7. Use levels for bench thin as they quickly dry. Previously carefully grind levels abrasive paper to remove even the prettiest hangnails.
8. Have levels at distance of 1-1.5 cm from each other for the best ventilation. Levels you fix from below.
9. As fastening of levels to frame use wooden chopik from strong breed of tree. For fastening from above use corrosion-proof fixture. Hats of fastening need to be utaplivat that they did not touch body.
10. Make average bench motionless, and top and lower on the contrary that it was possible to remove and dry them easily the room of bath. If desired add them with wooden supports for legs and the head. Get additional comfort when sitting on it or lying.