Economy of the place in the small room can be reached due to installation of folding, folding or bunk bed. The last option has number of advantages: it does not need to be displayed and put every day, such bed can use at any time. And it is not obligatory to buy it at all if at your place there is sofa or ottoman, they can be taken as basis and to make independently bunk bed.
It is required to you
- 2 guards, the protecting level (section of 50х30 mm), metal corners, screws, bolts, the processed bar (section of 50х30 mm) in which there have to be dredging for shelves of corners racks (are made of strong deciduous breeds, the section of 50х30 mm).
Instruction
1. Build on over ottoman the second tier in the form of the unary standard mattress having timber frame construction (frame or box). And the mattress has to correspond to ottoman length, and its width has to be slightly already, then the bed will not have bulky appearance.
2. Take 2 guards which have to be 20 mm wider and 200 mm higher than mattress. By means of bolts (diameter of 10 mm) attach guards to mattress (to sides).
3. At the level of the top edges of guards fix the protecting level (section of 50х30 mm). For this purpose use screws and metal corners. Free regiments attach 2 metal corners to the lower part of frame of mattress down.
4. Then attach the processed bar (section of 50х30 mm) at the height of 1700 mm (concerning floor), using bolts (diameter of 10 mm). By means of bolts attach to the top mattress of rack, and then establish mattress.
5. Attach racks bolts below to ottoman sidewalls, back part of the top mattress will lean on bar which dredging had included regiments of corners. In that case the mattress will be reliably fixed. For this purpose, who will sleep on the second tier, attach reliable steps to one of racks, then will easier climb up the second tier.
6. If you cannot fix basic bar on wall, then establish just the same racks, as well as in front. Only in addition fix them by bolts to wall. Paste over with self-adhesive film panel board elements or just paint them with nitroenamel. When choosing enamel consider color gamma of the room. Process bars by means of abrasive paper No. 1 and paint with varnish. Of course, to make such bed, it is necessary to stock up with patience and to tinker a little. But believe, children will surely estimate your work, and with pleasure will go to bed in such remarkable bed done for them with loving care in the evening.