Open regiments meet in many apartments. Some inconveniences are accompanied by their use. The fact is that on open shelves in disorder of paper, book, cosmetics, toys and office quite often lie. And all because open regiments usually the first catch sight. To get rid of disorder on shelves or at least doors which if desired can give any form for which there will be enough imagination will help to disguise it to you. So stock up with materials and tools and forward.
It is required to you
- The bookshelf on which you intend to hang doors;
- The sheet of fiber board 15 mm thick and other sizes on shelf dimensions;
- Pencil with ruler;
- Abrasive paper;
- Electrofret saw;
- Respirator;
- Aqueous emulsion ink of favourite color;
- Paint brush;
- Drill and flat drill (2.5 cm);
- Four flat door hinges;
- Screws;
Instruction
1. Upon purchase of fiber board ask at once that to you have sawn off it to the necessary size – so you will save the forces and time. Halve plate by means of pencil. If you want to make doors figured, just draw in the middle the twisting line. For example, having drawn the zigzag line, you receive as a result of door with zigzag contours.
2. Make the electrofret saw accurate has spent on drink on the nacherchenny twisting line. Do not forget to use respirator or at least gauze mask. Properly smooth out abrasive paper the sawn-off edges, paint "will eat" distance between doors on the whole millimeter. If the slot is insufficient, doors will stick.
3. Now take drill and insert into it flat drill. You will need to make drill in each of doors on opening for finger. And the provision of these openings will depend directly on form of doors. Make tubule of piece of abrasive paper and grind it edges of opening. Here fine-grained abrasive paper is necessary to make edges of openings smooth.
4. Now paint doors with aqueous emulsion ink, and do it in two layers, putting the second layer only after drying of the first.
5. Define the place where there will be loops for your doors. For this purpose pricker pin openings under screws. It is necessary to privorachivat at first loops to doors, and then and doors to shelf walls. To you has only remained in prison to try whether doors open. In case they stick, just clean edges of doors abrasive paper. That's it.