The easy frameless chair, or chair bag, is known around the world. Resulted from the embodiment of the extraordinary decision, it has won set of awards and appreciation of public. This chair has the different forms, the most widespread of which - drop (pear).
It is required to you
- The scaled paper, ruler, compasses, scissors, the sewing machine, dense fabric, fabric for covering, polystyrene balls, zipper is not shorter than 0.5 m.
Instruction
1. Define what size there will be chair. Everything depends on your preferences. As a rule, chair height for the adult is 1-1.2 m. Choosing material for sheathing cover, consider its features. Material has to be wearproof, easy in leaving and corresponding to color gamma of interior.
2. Make pattern on scaled paper, having noted height of chair and width of the basis, for example 0.3 m. Mark width of upper part – 0.15 m. For giving of the rounded-off form on the center of the top line of wedge lay off 2 – 3 cm down. Smoothly draw the line from this point in wedge corners. Round off the lower part of part in this way.
3. Now execute top and bottom of chair. Using compasses, draw circles which radiuses are 0.3 m and, respectively, 0.15 m.
4. Cut parts and transfer them to fabric tailor's piece of chalk or piece of soap, having left 2 cm on allowances. Cut out 6 wedges and two circles.
5. Sew at first the top cover with zipper. Put two wedges the faces and sweep away lengthways on the one hand. Having left in the middle the site equal to zipper length. Stitch together parts since two ends. Sew zipper.
6. Tack the following wedge, then pristrochita on the machine. Iron allowances together for one party and you otstrochit lengthways from face side at distance 1 cm from pritachivaniye seam. Putting with previous the faces, one by one sew all wedges.
7. Now execute upper part. Turn bag inside out and apply round part of smaller diameter face side to the faces of the wedges sewed together. Stitch together, together iron allowances to the center of circle. Turn out cover and execute stitching. Open lightning and the same way sew, and then you otstrochit chair bottom.
8. On the same pattern sew internal cover. Only do not sew lightning, and leave opening and through it fill "pear" on 2/3 granulate. About 4-5 kg of balls of polystyrene are required. Sew up manually opening. Put on already sewed cover.