The hinged coded lock is practical means of safety. The key from it will not be lost and only you will know the confidential code. Nevertheless, there are such incidents when, absolutely accidentally, it is possible just to forget combination of digits. There are several effective ways to open the hinged coded lock.
It is required to you
- - 2 hammers weighing 0.5 and 2 kg;
- - Bulgarian;
- - stethoscope;
- - can;
- - scissors.
Instruction
1. Unfortunately, it is not always obviously possible to call the specialist in opening of locks. If the digital code on the lock is established at manufacturer, and you have forgotten it, then no master keys will help here. In this case it is possible to use make-shifts simply to crack it. Perfectly two hammers weighing 0.5 and 2 kg will be suitable for this purpose. You put the small hammer to the lock basis, using in quality quickly, and big you strike heavy and sharp blows. Instead of the small hammer also the chisel will approach. It is possible to use the Bulgarian and just to saw handles. Nevertheless, often there are such situations when it is necessary to leave the hinged coded lock safe and sound. Then you will suit other methods.
2. The second way is that it is possible just to pick up combination, in turn twirling by wheels. Pull handle of the lock on yourself so that she pressed on wheels. Further slowly rotate them, starting with the hardest. If have heard weak click, then you pass to the following wheel. Further - on algorithm. The majority of models of hinged coded locks it is possible to pick easily, having used this way. Keep in mind that the click can be hardly heard therefore it is possible to use stethoscope.
3. The third way is selection of combination of digits too. It is suitable only for those locks which have 3-4 wheels, but no more. There is a lot of options (more than 2000), but nevertheless it is worth showing a little assiduity and patience that your works were not vain.
4. And at last - one more way to open the hinged coded lock which operates smoothly. Cut out small plate from normal can. Further - round off it on diameter of handle of the lock. Insert it against the stop into the technology slot located between the body of the padlock and the handle. Now make a few efforts to unblock internal latch. It is ready!