The ceramic tile is one of the most popular materials for performance of fine finish. In such rooms as the bathroom or kitchen, other materials for finishing of floor and walls use extremely seldom.
Modern finishing materials represent big scope for design imagination. One-color walls and floor – it is a little boring. Therefore materials for fine finish are released in various registration. Sometimes to execute finishing, it is necessary to work much, but if to make enough efforts, the result is worth it.
Tile for finishing
When facing floor and walls the tile can be chosen monophonic, and it is possible to make composition panel. For tile vykladyvaniye with the drawing it is necessary to work more, than during the work with normal one-color material. Here it is necessary to monitor not only equal laying of ranks, but also behind that composition it turned out correct.
Except picture, it is possible to lay out mosaic, the repeating drawings. But at vykladyvaniye of any complex composition it is necessary to begin the calculation with the center of the room – at such approach it will be possible to cut off then equal pieces which will be suitable by the size for final sites. Laying of tile with the drawing is carried out in a certain way. The panel gives all the best on the cleaned floor, is leveled at the edges then as it is possible more precisely lines of the drawing are adjusted. On reverse side of tile it is possible to put digits not to mix sequence of laying. It is better to begin mounting with the middle of row – so more convenient to provide symmetry and coincidence of the crossed lines.
As it is necessary to stack tile
Laying of tile should be carried out only on well prepared surface. It should be cleaned from dirt and dust, to smooth down roughnesses. The way for alignment of surface should be chosen depending on its material. To define the center of the room from which it is necessary to begin laying it is necessary to measure the middle of two adjacent walls, to note them and to pull cord. The center of the room will be where cords will be crossed. It is better to make the plan of laying on paper in advance, to make marking lines, and then to transfer them to floor – by means of cords, for example. If any objects like the furnace or fireplace are indoors located, it is necessary also to care for that when laying the tile would surround them symmetrically. In such places the asymmetry is evident at once. Apply with the palette glue on the small site of floor. Tile press on glue, having pressed it to floor. Not to get off, follow the marking prepared in advance. Gradually moving ahead so, you fill all site. The tile in ranks, adjacent to walls, should be cut according to the necessary sizes – it becomes by means of the special device-plitkoreza.