How to paint ceilings with the roller

How to paint ceilings with the roller

White equal ceilings in your apartment - it, first of all, is beautiful. Modern construction tools will help to create similar beauty to you. To paint ceiling exactly and accurately, you for performance of work will need paint roller.

It is required to you

  • - small roller with large pile
  • - roller big with average pile
  • - cuvette for paint
  • - pin (shank for rollers)
  • - brush
  • - paint

Instruction

1. Rollers are big and small, to long pile and absolutely short. Rollers with average pile will be suitable for painting of ceilings. They absorb enough paint that for once to cover the area of ceiling in 1 sq.m.

2. Before painting of ceiling make preparatory work. If the ceiling has been covered with whitewashing, then wash away it. If the ceiling has been painted with aqueous emulsion ink, then wash it with warm water. If on ceiling wall-paper has been pasted, then wet them and remove the palette.

3. After you have cleaned ceiling from old finishing, look whether there are no cracks on it, poles, roughnesses. If such errors are available, then close up these places solution or hard putty. Then proshkurta also ground all ceiling primer. After the ceiling dries out, can start painting. For painting of ceiling use the roller with pin (shank for rollers), it will help you to do without step-ladder.

4. Begin to paint ceilings from corner which is closer to window, and gradually you leave deep into rooms. Important element in painting of ceiling is its adjunction to wall. To paint over adjunction use the small roller of 5 cm with long pile. Especially carefully paint over ceiling corners. For this purpose you can use brush. Lower the small roller in cuvette with paint, roll it on network that it was not too crude, and bring to ceiling perimeter. Further with small effort carry out by the roller at the left on the right. Do not try to paint over all perimeter at once. Do it when you paint at wall.

5. You carry out Osnovnaya Square of ceiling the big roller with average pile. Dip it in cuvette with paint and roll on network that paint was evenly distributed on the surface of the roller. Further bring it to ceiling, but do not try to hold it directly at you over the head. Mentally allocate yourself the sector of equal 1.5 sq.m and begin to apply paint with parallel strips, evenly painting surface. You put the following strip so that it blocked previous. Then paint over this sector lengthways, it will help to avoid surface neprokras.

6. Try to paint over ceiling carefully, do not allow admissions, otherwise it will affect the end result. The ceiling will turn out spots, it will be impossible to correct this defect.

7. During operating time do not press strongly the roller. Try to distribute paint evenly that there were no smudges on ceiling surface. If nevertheless excessive paint was formed, then shade it diversely.

8. Ceilings are painted for 2 or 3 times, it depends on quality of paint. After the first painting of ceiling let's it dry out. On bank with paint it is written, what is the time it will be required before full drying of surface. Then paint over ceiling the second time, but in opposite direction, that is from room depth to window. If you have performed the work competently, then there are enough two times for painting of ceiling.

Author: «MirrorInfo» Dream Team


Print