The mold is formed by disputes of fungi which begin to expand under favorable conditions. The black mold is long growth dispute which deeply take root into all surfaces. The phenomenon this very dangerous as air in the apartment is saturated with disputes that causes asthma, allergic reactions and significantly weakens the immune system of the person, especially small children. The mold should be eliminated immediately.
It is required to you
- - chlorine-containing means;
- - brush;
- - antiseptics;
- - thermal fan;
- - additional ventilation system.
Instruction
1. If to the room the mold has appeared long ago and promptly extends on all surfaces, so you have badly equipped ventilation and air humidity is increased. Before fighting against mold, install additional ventilation system or clean the mine of already available. Isolate all pipes on which condensate is formed from walls by means of waterproofing. Previously apply protective antiseptic primer on pipes and carry out new coloring. It will help to kill mold disputes which for certain are present also at pipes.
2. If the mold has struck the big areas and surfaces, then it is simple to remove it it will not be possible. You should skim all of plaster and finishing materials, to carry out antiseptic processing of surfaces by the special means preventing mold growth. They are widely provided in construction supermarkets. And only after that to make finishing of the room new materials.
3. After repair carefully air the room and install additional devices for drying. As additional devices you can establish radiators of heating or dry surfaces by means of the thermal fan. It is necessary to do it systematically.
4. If the mold has struck small sites of the room, then it it is possible just to wash away, process surfaces anti-septic tank and to dry carefully.
5. For processing part tablespoon of dense chlorine-containing means in 7 liters of warm water, dip brush in solution, you apply on it in addition several drops of chlorine-containing means and wash out the struck surfaces. After washing direct the thermal fan to walls to dry the washed surfaces. Then apply the antiseptic solution preventing emergence of mold by means of brush and again carefully dry everything.
6. These actions will help to remove mold, but if you do systematically not air and dry the room, then they will help on short period.