How to remove scum in the iron

How to remove scum in the iron

Sooner or later internal cavities of your iron with function of otparivaniye can become covered by scum. Usually it occurs pretty fast if you fill in in the tank water from under the crane. As a result, from openings on sole lumps of lime take off and soil linen. You need to remove scum in the iron and from now on to use only soft water, then cleaning should be done much more rare.

Instruction

1. Use function of cleaning of the iron (the special button on the body) which is in many modern models. If there is no treasured button, use the couples function. Act so: • fill the tank with water mix with the citric acid which is completely dissolved in it; • connect the iron and let's it be disconnected automatically; • switch off product, let's it cool down and repeat the procedure; • substitute basin under model sole and include function of independent cleaning or couple; • evaporations will remove scum from the iron. Shake by sole over vessel to help to exhaust to leave internal cavity of product.

2. Use special means for cleaning of scum which can be bought in shop of household appliances. Part it in water and act according to the instruction. Often use industrial cleaner so: • fill in solution in the switched-off iron; • include product and set steam mode until from openings on sole foam begins to be emitted; • switch-off the iron and put on half an hour on terry towel; • repeat the procedure and several times wash out (steam) internal cavity of product clear water; • the sole is wiped with damp rags and allowed to dry.

3. Try to clean the iron from scum by means of national methods. For this purpose take frying pan in which the product will be located. Dissolve water with vinegar (liter on 200 g) and pour the received mix in frying pan. It is necessary further: • to put the iron in liquid so that it has covered sole on 1.5 cm. The internal cavity of steam formation has to be filled, but protect rubber parts of the body from vinegar; • it is possible to put back part of product on edge of frying pan or to enclose under it coins (or other supports from metal); • put frying pan on weak fire and 10 minutes "you boil" the iron; • remove scum with function of cleaning or steam; • steam the tank clear water and you dry the iron several hours before again to use it.

Author: «MirrorInfo» Dream Team


Print