How to save anturium

How to save anturium

The unusual form of anturium involves practically all amateur gardeners. Its refined beauty and unusual "tail" do this plant by one of the most popular in room floriculture. The anturium is rather whimsical. It does not take out fall of temperature, drafts, direct sunshine, drying or overwetting of the soil. At excess of moisture the roots of anturium begin to decay and the plant can die. If your anturium has ached septoriozy, it needs to be saved.

It is required to you

  • - soil for azaleas;
  • - universal soil;
  • - mulch;
  • - sphagnum;
  • - wood charcoal;
  • - drainage;
  • - vermiculite;
  • - basin;
  • - flowerpot;
  • - fundazol;
  • - capacity for fundazol;
  • - fitosporin;
  • - medical gloves;
  • - measured glass;
  • - scissors;
  • - copper vitriol

Instruction

1. Prepare to gruntvozmita basin and prepare mix for soil. You recognize calculation that one part of soil is equal to three measured glasses. On one part of soil for azaleas it is necessary to take one part of universal soil, 1/2 parts sphagnum, 1/4 parts of vermiculite, 1/4 parts of wood charcoal.

2. Prepare drenazhtshchatelno wash out drainage and fill it in flowerpot. The drainage layer has to be equal in pot to 3 cm.

3. Take fundazol and part it in the prepared capacity according to the instruction.

4. Put on rubber gloves and get anturium from old pot. Clean plant roots from the earth and carefully wash them with warm water. It is necessary to make all these procedures very accurately since roots at anturium very brittle.

5. Put plant roots in solution of fundazol and leave for 40 min.

6. Check and process root system anturiumavnimatelno examine all roots. Cut off rotten sites and powder places of cuts with coal. Cut off all struck leaves and peduncles.

7. Fill the prepared soil in flowerpot. Accurately, without breaking arrangement of root system, place plant in new pot. Carefully fill up soil and slightly condense it. Densely it is impossible to stamp soil since the plant needs air. It is not recommended to water the replaced plant. Spray plant with copper vitriol and put to the usual place.

8. Water plant in 2-3 days after change. Use warm water for watering. After soil dries out water anturium once again and spray fitosporiny.

Author: «MirrorInfo» Dream Team


Print