All household appliances demand the correct connection. But especially carefully it is necessary to treat installation of the equipment running on gas. Even the small mistake can lead to sad consequences therefore connection of gas-fire requires special attention, observance of all rules and accurate execution of instructions.
Instruction
1. At installation of gas-fire, first of all check integrity of the body regarding mechanical damages. It is important as the gas-fire is very dangerous household appliance. Therefore, in the presence of obviously expressed mechanical damages, especially on the back panel the connection of plate to gas network is strictly forbidden.
2. If the gas-fire has electric oven or function of autoignition, then it is necessary to bring electricity to it. At the same time install the socket with the grounding contact and lay individual force line from board, using the PVS cable for mounting. In electric board install the time cut-out on 16 A.
3. When leading to electricity gas-fire without fail use the separate automatic machine and grounding. Remember that at all use of the general household socket as diameter of section of cable of gas-fire does not approach in some parameters standards of the normal socket is not allowed, and besides there is risk that the existing system of wiring will not sustain power the consumed plate. Do not forget that misfitting to "Rules of safe operation of electric devices" of connection of the electric power, can lead to unpredictable and very dangerous consequences.
4. The following, very responsible stage is mounting of gas hose to gas network. When carrying out this work use only the tested hoses, especially in places of connections. Data on tests have to be noted in the certificate of quality which without fail have to be provided by the seller. Remember that when performing works of this type, inadmissibly to use "not gas hoses".
5. Installation of the gas-fire on the chosen place will be further stage. At the same time very much show consideration for alignment of gas-fire concerning the floor plane. Perhaps, for this purpose special devices and some practical skills will be necessary for you. At installation of the built-in gas surface, maybe, you should cut the corresponding opening in table-top for its fixing.