For protection of houses against cold weather various materials – both traditional, and modern are used today. Jute – unique heater, the closest relative of hemp and linen belongs to the last category. This eco-friendly material allows to cope with problem of warming of walls of the building as soon as possible.
Jute as mezhventsovy heater is applied generally at construction of wooden houses of any types. It can be constructions from the rounded log, glued or simple bar, log houses. At the same time to each case it is possible to pick up optimum type of jute. Fibrous material is produced in the form of tape 5, 8-10 and 15 mm thick. It is also possible to stack jute in various ways.
Ecologically safe thermal insulation material allows to exclude double caulking iron, and it means that time of construction of the building is reduced. Besides tapes are on sale in finished form, it is enough to unpack of them only.
What is jute?
Jute represents the annual plant growing in the warm countries. Mainly – in India, Bangladesh, Pakistan. Its escapes are used not only for carrying out insulating works, but also for production of ropes, burlap, mats. Fibers of jute do not contain any impurity therefore material quickly became popular in construction. Thanks to golden shade, jute is similar to tree in color and when warming of walls by it does not require to paint tapes in addition.
Today jute is processed, on production it is possible to receive group of materials - felt, tow and mix from linen and jute. Jute is really very similar to flax, not only externally, but also on the properties. For example, heater has small heat conductivity, quality material can carry out excessive liquid.
Advantages of jute as heater
It is very easy to lay jute ribbons in grooves, at the same time fibers long serve thanks to the content of natural pitch – lignin. It saves raw materials from rotting. To fix jute tape, it is enough to use the construction stapler. And if it is required to drill dowels, fibers of jute are not reeled up on the tool that is very convenient.
In groove of log or bar golden jute can be stacked without bends, with one-sided or bilateral bend.
Mezhventsovy heater jute helps to reach uniform and continuous warming of walls. Depending on characteristics of the house, it is required to lay tape in only one layer. If the building is made of normal bar or built in the place where with guarantee blowing off of walls, jute is used in two layers. Tapes can be cut off normal scissors, waste there will be minimum. It is possible to use also needled technology, so jute fibers will be condensed and winds will become more resistant to influence of moisture.