Hinged lockers in a complete kitchen help to save a lot of space as very capacious, and to give to a set an organic look. When they are reached by business, the problem puzzles - how to hang up kitchen lockers on a wall? Versions of fixture there are two, a special lath for installation, or having used furniture fixtures.
Performance of work requires tool kit:
- drill, or puncher (if wall concrete);
- level;
- roulette;
- pencil;
- screw gun or screw-driver;
- clamps.
It is also necessary to consider material of which the wall on which it is necessary to hang a case is made. If it wooden, then for fixture use red-hot screws, the anchor bolts, or usual bolts will be suitable for a concrete or brick wall a dowel with a stopper. For a wall from gypsum cardboard, special fixtures of a butterfly (Mollie's dowel) are necessary.
How it is correct to hang up kitchen cabinets on an assembly lath?
Use of a lath for installation will significantly simplify a task of a canopy of cases, is made quickly and does not demand the third-party help.
The robot should begin with determination of height under a case, considering features of growth of those who will use a set, generally the bottom of a hinged case is at the height of 45-50 cm from a working surface.
- Measure the necessary piece of a lath under a case.
- Later, apply a case to a wall and mark with the line box height, the second line note height at which the lath, on its upper bound will fasten. Distance between lines about 3-4 cm exactly to hang up kitchen cabinets all marks check only level, you should not measure distance from a floor or a ceiling, they can not coincide.
- Attach canopies on a back wall of a case so that they departed on 2-4 mm from it, drill openings under a lath a drill of the necessary diameter. If a wall from gypsum cardboard you drill more often and drive in a dowel or use fastenings butterflies, fix a lath.
- Hang up cases, their porovnyayta among themselves and horizontally by means of screws for adjustment.
- Using clamps, pull together cases among themselves, drill sidewalls of boxes and fasten them with an intersection coupler. In order to avoid chips on furniture, under clamps enclose wooden bar.
- Installation is ready, put regiments and hang up doors.
"