Some owners of own personal computers for definite purposes want to disperse a system, and for this purpose it is required to increase cooler speed on the processor: as to make it, it will be told in this article.
How to increase cooler speed through Bios?
If the motherboard supports an option of increase in speed of functioning of a cooler, then it is enough to turn on the computer, to leave in the BIOS menu and to pass into the section Power. The option of adjustment of speeds of the necessary element is in the subsection Monitor Konfiguration. The name can differ depending on motherboard model, but anyway it has to contain the word Fan. Further it is necessary to choose Enabl, and then Profile from the offered options. Those who wants to know how it is possible to increase cooler speed need to choose the Performance mode on which this device will work at a limit of the maximum opportunities.
Quite often happens so that in the menu Bios is not present function of control of coolers. To understand how it is possible to increase the speed of rotation of a cooler in this case, it is necessary to download the utility under the name SpeedFan. In the first jumped-out window it should be noted not to show again and to press to close. In the following window actions for adjustment will also be made, but before to do it, it is necessary to make sure that coolers are powered from the motherboard, and if not, then they need to be taken out independently from the power supply and to thrust where follows.
Now it is possible to press arrows opposite to each inscription Speed from 01 to 06 up, thus increasing the speed of rotation of any given fan. At the same time it is very important to watch temperature which is specified in the same window on the right that there was no failure in operation of the computer. By the way, not everywhere the system gives the chance to operate all coolers: in some devices it is possible to change these speeds of the processor fan only.