All types of organic fuel - oil and its derivatives, gas, coal, firewood, peat are not equivalent when burning. In them different stocks of energy. But for calculations it is necessary to know, quantity reserved in them energy. Therefore for convenience of calculations at power engineering specialists the concept conditional fuel is used. Conditional fuel is called such fuel which heat of combustion equals 7000 kcal. on 1 kg.
It is required to you
- calculator
Instruction
1. For transfer of fuel to conditional tons there are special tables. To transfer the set fuel weight to conditional tons, just increase the number of tons by the corresponding coefficient. So, for example, one ton of the Altai coal corresponds 0.782 conditional tons of fuel. For transfer of one ton of coal to conditional tons use the following table. COAL: Altai, 0.782 Bashkirsky, 0,565 Vorkuta, 0.822 Gruzinsky, 0,589 Donetsk, 0.876intinsky, 0.649 Kazakhsky, 0,674 Kamchatka, 0.323kansko-Achinsky, 0.516 Karaganda, 0.726kizelovsky, 0.684 Kirgizsky, 0,570 Kuznetsk, 0.867lvovsko-Volynsky, 0.764 Magadan, 0.701 Podmoskovny, 0,335 Seaside, 0.506 Sakhalinsky, 0,729 Sverdlovsk, 0.585 Silezsky, 0,800 Stavropol, 0.669 Tadzhiksky, 0,553 Tuva, 0.906 Tungussky, 0,754 Uzbek, 0.530 Ukrainian brown, 0.398 Hakassky, 0,727 Chelyabinsk, 0.552 Chitinsky, 0,483 Ekibastuz, 0.628 Yakutsky, 0,751
2. For transfer to conditional tons of other types of fuel use the following table (just increase the number of tons of fuel by coefficient): Milling peat, 0.34 Lumpy peat, 0.41 Fragmented peat, 0.37 Coke of metallurgical, 0.99koksik 10-25 mm, 0.93 Coke trifle, 0.90 Briquettes fuel, 0.60 Gas of oil processing dry, 1.50 Leningrad slates, 0.300 Estonian slates, 0.324 Gas liquefied, 1.57 fuel oil, 1.37 Fuel oil naval, 1.43 Oil, including gas condensate, 1.43 Waste oils, 1.30 diesel fuel, 1.45 Fuel oven household, 1.45 Gasoline aviation, 1.49 Gasoline automobile, 1.49 Kerosene lighting, technical, aviation, 1.47 Bark, 0.42 Waste of agricultural production, 0.50 Wood cuttings, shavings, sawdust, 0.36
3. Sometimes coefficients of the translation are set only for fuel volumes. In such cases cubic meters or thousands of cubic meters of fuel are transferred to conditional tons (for gas). For calculation of conditional tons increase the number of m³ or one thousand m³ of fuel by the corresponding coefficient. Passing combustible gas, thousand m³ 1.3 natural combustible gas, with thousand m³ 1.15 Charcoal, warehouse m³ 0.93 Sawdust, warehouse m³ 0.11 Firewood for heating, dense m³ 0.266 Kick, warehouse m³ 0.12 Boughs, needles, spill, warehouse m³ 0.05 Logs of the sorted old buildings, cross ties, communication columns, dense m³ 0.266