There are several technologies of nail extension by gel. And the choice of technology will depend on on what nails will be increased (on tipsa or forms). Depending on your choice the procedure can borrow from 1 toseveral o'clock (especially if it is held by the beginner).
Instruction
1. So, the recipe of the first technology will contain data on nail extension by gel on tipsa. That is the so-called single-phase technology will be described. First, the master needs to disinfect both the hands, and the client's hands. Then it is necessary to remove cuticle (for example, by means of orange sticks) or to remove it. The luster is recommended to be removed from natural nails file only 180-240 grit (the measure grit is indicator of rigidity of file). Remove dust, and then cut to the necessary length of tipsa, remove from them luster. Surely cover natural nails with degreaser, put primer a bit later. Wait until it dries, and paste tipsa. Further you can apply thin film of the single-phase modeling gel on the surface of all nail, dry it in ultra-violet lamp. Now it is time to apply the modeling gel, to create artificial nail. Again dry nails in lamp. Remove sticky layer after drying special means. Artificial nails can give the final form, having sawn round them file with rigidity 150 grit. Repeat the procedure of putting the modeling gel (at the end dry it again). In the conclusion massage cuticles oil (lavender, peach or any other).
2. The following technology describes the procedure of extension of gel nails on forms. You can repeat several main points from the first recipe: disinfect the client's hands (and the too), remove cuticle, remove luster from natural nails, cut tipsa to the necessary length, saw round them. Do not forget and apply degreaser and primer on each nail. Dry nails. Further perform other operations: on all nail apply thin film of basic gel and dry it in UV lamp. After that it is necessary to use the modeling gel, also to dry nails in lamp.
3. If is need, then the procedure of putting the modeling gel it is possible to repeat. As it has been already told, the stickiness can be removed from artificial nails special liquid. Nails have to be sawn round by file about 150 grit. By the way, the difference of this technology of building is that at the end of the procedure the finishing gel is surely applied on nails (he is called still uf-siller or the finish gel) and nails dry in lamp. Do not forget about massage of cuticles.