Some users categorically do not accept their access rate in the Internet and data transmission in a local area network. These problems can be corrected in several ways.
It is required to you
- - Advanced System Care.
Instruction
1. First, define quality of operation of your router or network hub. Rather often there are situations in which the budgetary models of these devices simply do not cope with loading. Besides, the above-stated equipment can deteriorate. Try to disconnect several computers or laptops from a local area network and to check quality of change of data transmission rate.
2. Make sure that your network is not overloaded. For example, when on certain computers the programs which are actively using a network link are started it can negatively affect network functioning in general. Exclude such programs as uTorrent, Download Master and Skype from constant use. Pay special attention to the programs scanning open ports of other computers, for example NetLook.
3. Check settings of network adapters of certain laptops or computers. If you deals with rather big local area network, then try to distribute evenly load of all switches by means of which it is constructed.
4. Optimize all computers which are a part of a local area network. For this purpose it is necessary to disconnect excess services and to clean the register. Install the Advanced System Care program. It will allow to carry out the above procedures quickly.
5. Start the utility and pass into the Cleaning of Windows menu. Activate four points located in this menu. Click "Scan". Wait until the program checks a system and the hard drive for existence of errors. Click "Repair".
6. Open the Diagnostics of a System menu. Repeat the procedure described in the previous step. Open the Utilities menu. Pass to the Internet Assistant point.
7. Select the Avtooptimization parameter and click "Forward". Specify approximate average rate of Internet access. Click "Optimize". Close the program.