Wi-Fi - a wireless internet which is distributed from the device called the router. Interruptions of distribution of a signal of the Internet are connected with several problems which can be eliminated in most cases independently.
Instruction
1. Wi-Fi can work with interruptions because a row located objects which disturb a signal normally will extend. For example, the microwave oven or the fridge are located too close to the router. Waves which they extend, kill a signal. It is possible to solve a problem simply: rearrange the router on other place.
2. Perhaps, a problem because of close arrangement of metal designs. For example, the house stands too close to the railway station or paths. These designs prevent the correct signal transmission. Moreover they distort it. It is possible to solve such problem if to find a stable and not changeable point where it is possible to put the router in the house. Check by practical consideration until you find this place.
3. If two next routers work at one frequency, then they will interrupt each other. For example, at you and your neighbor behind a wall of the device are configured on one frequency. During simultaneous use of the device can interrupt each other. The signal will be poor and changeable both at you, and at the person behind a wall. It is possible to correct it, having recustomized the device on other frequency of work if it is provided by vendor. So, for example, mobile routers from the cellular companies work only at one frequency which cannot be replaced.
4. Quite often bad signal arrives from the weak antenna. For example, it too short or is sent to some one party. It is possible to fight against it. For a start try to twist the antenna. If the signal and continues to break, then try to replace the antenna more powerful and long. It is possible that during operation old it was damaged.
5. Weak power of the device happens such from the very beginning, and happens that settings get off by itself. It is possible to correct it, having visited the official site of the model of the router. If it is supported by vendor, of course. If there is no opportunity to correct power independently, then it makes sense to contact the service center or to buy the new device.
6. Problems can be because of the outdated version of a firmware. It happens too. Long use of one router, without any updates, conducts to the fact that the firmware becomes outdated. Because of it and the signal begins to go with interruptions. That to correct it, it is necessary to download and install on the official site of the model of the router more modern drivers and updates to them.