In several years of use any door begins to squeak. For prevention of scratch there are several ways. Anyway, it is necessary to carry out adjustment of door. For this purpose only the box wrench on 17, hexagon and WD-40 lubricant is necessary.
Instruction
1. Before being engaged in adjustment, it is necessary to examine door attentively. It is necessary to define precisely in what place there is scratch and for what reason it occurs. The scratch can proceed from the hidden adjustable loops. Also often it arises because of friction of door cloth about door.
2. If the scratch goes from loop, then it means that on them dust has got. Most often it occurs if in the house construction repair works are performed. To prevent scratch, it is necessary to blow loops and to process WD-40 lubricant. If you have established doors of Outpost model 28 which open by 180 degrees, then it is necessary to blow and grease also internal loops.
3. If in your house the flat metal door passes drafts, cold and also noise, then for repair it is necessary to use rubber sealants. They are on sale in the construction markets and in shops of construction materials. It is the best of all to buy thin sealant. It is necessary to glue it on door from the inside on consolidation contours. It is necessary to apply sealant only to those places where there is no dense contact of door.
4. Further it is necessary to examine attentively door on availability of visible scrapes. Listen from where the scratch proceeds. Then it is possible to start adjustment of door. For a start it is necessary to weaken average loops. After that it is already possible to weaken the top or lower loop. All this depends on the place of scratch. Move up cloth or delay to box. Tighten nut at extreme loop. Well to poshatayta door. Loops have to take the place. With the lowered handle try to close and open door. Pay attention whether the scratch is published. If it became even stronger, it is necessary to repeat adjustment once again. If after adjustment of door have ceased to creak, it is necessary to tighten all fixing parts well.