Practically on each good car the alarm system is installed. However after a while each alarm system needs to be arranged. It can have strong impact on insignificant external conditions.
Instruction
1. For a start be engaged in programming of car alarm. Remove from protection and within the first 25 seconds after inclusion of ignition program necessary functions. For this purpose press the first button brelka and you hold it, you will not hear sound signal yet. Quite often before programming the LED begins to blink. It shows that the system is ready to programming.
2. After that be engaged in the function choice. Numbers of all functions consist their two digits. Press the first button brelka the necessary number of times. Thereby you will enter the first digit. To enter the second digit, press the second button the necessary number of times. When pressing the short signal of siren will be published and to appear flash of LED. The Excellent Comfort 2 alarm system itself understands that you have finished input of number if there are no pressing button 2 within two seconds.
3. The system has to confirm input with light signal. The LED has to show number of the chosen function. The number of long flashes shows the first digit, number of short - the second. For example, you need to choose function 14 which means "alarm type". For this purpose it is necessary to press once the first button and four times on the second button. Two seconds later LED we will begin to blink so: one long flash, four short. Consider, at nazhimaniye of buttons it is impossible to do breaks more, than for couple of seconds. Otherwise the system will decide that input is finished. If you were mistaken in water of number and have determined it by LED, then just repeat input.
4. After that it is possible to pass to the choice of state. Press the third button. The system has to confirm it with light signal. If there are single flashes of LED, then function type of alarm there is in state ""full alarm"".