If you want temperature in your house to depend not on season or weather, and is exclusive from your desire and mood, then in this case purchase of the conditioner will become for you the ideal decision. Today the range of climatic systems observed in shops is extremely big and, naturally, such choice can confuse the inexperienced person. Not to be mistaken with purchase and to choose the good conditioner, you need to know key parameters on which all technical characteristics of the device depend.
Instruction
1. At first it is necessary to decide on conditioner type: Monoblock conditioners consist of the compressor, the condenser and the evaporator which are placed in one body. Such devices in turn are divided into window and mobile. The first by means of special brackets are mounted in window opening. Mobile conditioners consist of the equipment package and long air duct which end needs to be brought to the street. Such system extends hot air out of borders of the room, and cold – leaves in the apartment.
2. The Split system is the most popular type of conditioners for the house. They are two separate blocks which are in and outside of the room (for connection the special frenovy pipeline is used). Such design will allow you to reduce considerably noisiness and to increase performance.
3. Multisplit-sistemy – are used when it is extremely irrational to apply normal Split system, for example, in cottages, country houses, big apartments. Their main difference is that such device consists of one external block and several internal. Thanks to such design you will be able to condition air in several rooms at once.
4. After you decide on conditioner type, it is necessary to check availability of the inverter. This device is intended for continuous adjustment of power of cooling. Normal conditioners constantly work at the maximum power and when cooling the room up to the certain temperature – are just switched-off. And invertor – smoothly reduce power. Besides one more advantage of such conditioner – decrease in consumption of power approximately for 40-50%.
5. The most important characteristic of this device – the power of cooling or its performance measured in Watts. Remember that any conditioner is calculated for work indoors with certain area. Therefore before purchase it is necessary to carry out conditioning calculation. It is quite simple to make it: about 1 kW of power of the equipment is the share of each 10 sq.m of the area. However height of ceilings in that case should not exceed three meters. The final result needs to be corrected, increasing power depending on the number of household appliances, room rate of exploitation.
6. Also it is recommended to pay attention to conditioner noise level, it has to be: for the internal block – 25-35 DB, and for external – 40-55 DB.