How to close up hole at doors

How to close up hole at doors

In life there is anything and holes appearing from time to time in interroom doors not exception. The reasons of their emergence are various as well as holes, and ways of closing up and zamaskirovyvaniye of these unnecessary openings differ in variety too.

It is required to you

  • - Drill;
  • - Glue PVA;
  • - Paint;
  • - Abrasive paper;
  • - Polyurethane foam.

Instruction

1. If the hole in your door looks approximately as on photos, that is several options as to close up it. Take drill and drill on 3-4 mm, drill in the receding parts accurate holes, on one on everyone. The metal or plastic hook passed throughout the drilled opening extend deflection outside that the torn edges have joined.

2. In hole squeeze out small amount of polyurethane foam of small expansion not to allow the pressed pieces to fail in door. Miss the mark edges of break with PVA glue and connect as much as possible exactly and densely. Cover with equal board, piece of plywood or the shelf which is taken out from locker (the size of these surfaces has to be more than the size of hole at doors) hole and press by means of clamps from two parties of door. In a day remove clamps, smooth out edges abrasive paper, miss the mark this place with PVA glue. When glue dries, walk on surface of the former hole small abrasive paper once again. Pick up paint of right color for the repaired piece or vykrasta all door completely that there was no difference in tone of paint.

3. If your style allows you to paste the cool poster or the plate on hole, then dare - it is the simplest option of repair of any hole at doors or on wall! It is possible to find tin plates with different inscriptions and drawings in shop of any tricks and if at registration of the room there is still something similar, then nobody will think that all these interesting features just cover holes!

4. Order by your size beautiful glass with stained-glass window type ornament instead of deaf cloth - the door will only benefit from such repair. It is possible to buy self-adhesive mirror or set of such mirrors (four pieces 30х30 cm), they cost not much and if to paste wooden reechka or figured borders on contour, then it will turn out very presentably!

5. It is possible leveled as it was told earlier, surface not to paint over paint in one color, and to make, or to buy cliche and to apply stylish patterns on door surface. The ornament which repeats the drawing element on wall-paper or upholstery of upholstered furniture made in the same color gamma will look very interestingly. In this case nobody will notice the repaired hole on door, unlike option with monophonic paint.

Author: «MirrorInfo» Dream Team


Print