The detector of the movement – irreplaceable element of the Smart home system: it can be used at the organization of video surveillance, connection of lighting system and other elements of protective system.
It is required to you
- - detector of the movement;
- - switch;
- - screw-driver indicator;
- - tester.
Instruction
1. Connecting the detector of the movement intended for management of lighting instrument (provided that they are combined), make sure that the sensor is calculated on that tension which is available in network.
2. Pay attention: total power of the lamps connected to the detector of the movement should not exceed the power on which this sensor is calculated.
3. Connect the motion sensor to network, having connected it to phase current. In certain cases appropriate to leave the control switch which would work with the detector of the movement. Availability of the control switch is necessary, for example, when for a certain time it is necessary to leave included in light indoors where there are no people.
4. For connection of the control switch parallel to the detector of the movement bring the standard switch and connect it. That is, in other words, the control switch provides inclusion of "emergency operation". The most part of time the control switch has to be in the mode "is switched off": in this case management of lighting will pass to the detector of the movement.
5. By means of tester ring out wiring and find wire which connects lighting instrument to the switch: connect it to the red wire leaving from the detector of the movement.
6. Then take the wire which is on other side from the switch, and connect it to brown wire of the motion sensor. After that connect blue wire of the detector of the movement to the wire suitable to lighting instrument not from the switch.