The modern kitchen most often provides the washing cut in table-top. In that case it looks continuation of furniture ensemble and very successfully fits into interior. To cut washing independently quite perhaps, for this purpose it is not necessary to have special skills and tools.
It is required to you
- - pencil;
- - fret saw;
- - tape measure;
- - silicone sealant;
- - fastenings;
- - screw-driver or screw driver.
Instruction
1. First of all apply table-top to borders of box on which it will be established. Consider all rated admissions, several times recheck. From within note pencil box contour.
2. Invert table-top and define arrangement of washing. Apply it top side to reverse of table-top and circle its contours with pencil. If washing borders on wall, do not forget to leave gap in case of need to level or trim the edge of table-top. Not less than 50-60 mm are desirable to leave stock.
3. Each washing on edge has side which will block part of table, measure its width by means of tape measure. This distance approximately equally in 12-16 mm is normal.
4. On table-top from noted edge of washing recede this distance and draw the same contour inside. As a result at you the strip with the same width, as well as distance from edge to ears under fastening of clips will turn out.
5. Exactly to draw internal contour of corners, put washing several centimeters closer to the opposite edge. When the line is ready, and you make sure that everything is lined truly, cut internal contour the fret saw.
6. Dress on washing of fastening and paste adhesive tape which will protect inside face from moisture hit. Paste tape so that to leave ahead small trench for filling of silicone sealant.
7. Grease edges with silicone, insert washing into table-top and attract it fastenings. Do not forget to remove before it from table-top protective film (if it is). To provide the best tightness, isolate it in two steps: at first circle with silicone layer the adherence plane, filling space to side, and after drying – put the second layer. Wait for the beginning of skhvatyvaniye and delay washing by fastenings.
8. At once wipe silicone which has acted on table-top. If he manages to dry, then during its removal you can damage silicone barrier under washing.