Thinking how to establish the pavilion or the trade booth, address experts who at first will make design, and that will make necessary actions, using the special equipment and following necessary rules of mounting.
Instruction
1. Solving how to establish the pavilion, at first you will choose the company which will be engaged in its production and also further installation. Before the conclusion of contractual obligations surely look whether this firm performed similar works on production of pavilions, stalls or booths as the true experts have to both to execute the standard project, and to develop reliable structure of the pavilion on special design.
2. What to make to establish the pavilion? First, make the order on its production, and after that prepare site on which this design will be established. Remember that production of pavilions quite often begins already directly on the place to avoid difficult delivery of large-size design to your site and use of the specialized equipment. Therefore the specialist of the company has to arrive previously to the place of mounting of the pavilion, see the site, estimate complexity of work, and then choose optimum type of load-carrying structures.
3. Secondly, you watch that measurements were exact, and after them experts already began to prepare your platform which surface has to become rigid and equal. Further step – filling of the base on which the design for the pavilion irrespective of its type will be founded. After that pay attention as experts carry out laying of special rails on which then all sections of the pavilion will move. For each section it is necessary to lay separate rails, and width of path has to pay off depending on design width.
4. The your pavilion in finished form will be longer, the more sections will enter its design, and the more widely there has to be path for the laid rails. Modern installation of the pavilion comes to an end with mounting of the separate sections which are carried out from polycarbonate panels or aluminum shapes and their subsequent fastening on runners. Do not forget about need of interior finish of your pavilion and also about warming.
5. For interior finish use composite panels, MDF or plastic lining. As heater for walls of pavilions normal inexpensive polyfoam is used, and warm ceiling mineral wool. If the design is executed from composite panels, then you can already not make external finishing of the pavilion, opposite case sheathe it outside the pro-thinned-out leaf.