How to light the kerosene lamp

Places where there is no electricity at all, remained not so much. However they are. For example, you have just got the seasonal dacha, and there have not stretched the power line yet. In this case the kerosene lamp, the benefit on sale very much is useful they meanwhile are. Such lamp and in hunting lodge, and even just in tent is irreplaceable.

It is required to you

  • Funnel
  • Kerosene
  • Matches
  • Wrench
  • Lubricating oil
  • Alcohol
  • Screw-driver

Instruction

1. Prepare lamp for work. Turn off fastenings of the handle, but absolutely do not remove them. Take off cap and internal cover of lamp. You will see ceramic nozzle which needs also to be removed.

2. Exempt lamp from all packing paper – in it usually wrap plafond not to damage it when transporting. Laying from above and from below needs also to be removed.

3. Find nozzle nozzle. Take the incadescent mantle, put it vertically and tie it to nozzle. Cut off excess piece of thread.

4. Close lamp cover and cap which you removed before work. Find mixing tube on lamp and direct it to the nipple. The nipple is on upper part of the evaporator.

5. Pour 1 liter of kerosene in the lamp tank. It needs to be done through mouth into which the funnel is inserted. Tighten cover of mouth and the trigger screw. The arrow of wheel has to specify up. Pump up the pump until the arrow specifies on 1.rkh.

6. All lamps can be lit by means of alcohol. Pour it in the tank of heating and set fire. Wait until alcohol evaporates. After that slowly turn wheel arrow down. The lamp has to begin to shine. Adjust light brightness, tightening up the screw-driver the screw in upper part of lamp. It can be done and by means of nipple needles, and by means of wheel.

Author: «MirrorInfo» Dream Team


Print