Outdoor recreation can be saddened by banal rain and wind while people can take refuge on verandah or in tent, the brazier with the keeping-up shish kebab will remain under precipitation. The problem in country house or at the dacha will be solved by installation of canopy over brazier.
Before construction you should make on paper the project of canopy over brazier or to look for it on the Internet. Usually in world wide web already ready options with the calculated material are offered. It is convenient. In most cases the canopy over brazier is carried out on bezfundamentny basis, that is the load-carrying structure just rushes into the earth.
Supporting poles
Logs or wooden bar with a diameter from 70 to 90 mm will be necessary for you for construction of the basis of design. It is necessary to dig the basis of log to the earth not less than on 50-80 cm and to strengthen by means of stone or to fill in with cement solution.
Usually the canopy form over brazier is carried out in the form of rectangle therefore 6 racks will be required (4 - at the edges and 2 - in the middle) for strengthening of design for the winter period of time. Height of racks after burying to the earth has to be 1.8-2 meters. To strengthen racks, they should be connected on perimeter, it is desirable on bolted connection by means of the square, it is also possible to use self-tapping screws. For this connection the eaves board of 40 mm in size is used. Connection happens crossbeams at the height of 1.7-1.8 meters. This connection is necessary both for mounting of roof, and for the general strengthening of design of construction. Racks often do functional, for this purpose fill hooks, small shelves for the tool (brushes, nippers for meat, grids of barbecue, towel), it is possible to make also the holder for tissues.
Rafters and roof
Rafters are established under inclination that there was water drain in the summer, and in the winter snow could fall from roof independently. For this purpose on fixture basis on perimeter the roof basis from dvadtsatimillimitrovy board is mounted. When mounting roof it is necessary to leave the place for exit of chimney pipe from brazier. The pipe is mounted at the height of 30-40 cm from the roof basis. Such distance is necessary in order that sparks and smoke from brazier have not damaged roof. Roofing material, leaf of professional flooring metal, slate, sheets of andulin can be suitable for covering of roof of canopy. For work it is necessary to cut them by the roof size, having left allowance for field welds and gap for descent of precipitation - about 10-15 cm from distance of rafters. It is obligatory to take pipe in ring from non-combustible material, usually do figured pads of thin galvanization, otherwise from sparks and heated pipe not to avoid the fire.