Duplyanka, unlike the birdhouse, is more hidden. If the birdhouse has the accurate geometrical forms and is allocated against the background of branches, then the duplyanka can be not noticed at all if not to know where it is. It is much more difficult to do duplyanka, than the normal birdhouse.
It is required to you
- Tools:
- Wood saw, hand or power drill, hammer, center punch, semicircular chisel spoon.
- Materials:
- Billet of wood of tree of deciduous breed, with a diameter about 20 centimeters, and long in 50 centimeters. Board and croaker.
- For fastening of design it is possible to use nails and screws.
Instruction
1. So, we start production. For a start it is necessary to saw off hacksaw from trunk billet of wood of the necessary length. We fix billet of wood in vertical position and drill we drill core. Sometimes the core is struck with decay. In it there is nothing bad. It is necessary to choose on strong walls.
2. We process core tseraziky and chisel. The billet of wood has to be as a result hollow. Walls have to have thickness in 3-4 centimeters.
3. We measure opening at the end of billet of wood, and then we cut bottom of this diameter from board. We insert the made bottom into opening. By means of center punch on the ends of strips pads it is necessary to make openings for nails of roofing iron. It is necessary to nail up pads, having fixed by that duplyanka bottom.
4. By means of pointed drill or chisel it is necessary to do in sidewall of notches which has to have diameter of 3.5-4 cm. The best option is use for opening notch from the dropped-out old knot.
5. In end it is necessary to screw fixing hook in half of billet of wood and to establish duplyanka in the chosen place.