The ladder is not only functional architectural design, but also practically the most perceptible part of design of internal interior. You can independently make ladder.
Instruction
1. For a start you need to calculate all design correctly. Accurately be defined what ladder you want to receive as a result. Pay special attention to geometry of stair well. For example, the spiral staircase will harmoniously look in aperture in the form of circle, and to mid-flight the aperture in the form of square or rectangle well approaches.
2. The ladder which has wheeling steps is considered the simplest design. It fastens on the stringer. Steps of such design have width about 40 cm and height no more than 25 cm. The wheeling step has width of normal step. It is necessary to begin calculations with these sizes.
3. For creation of ladder you need to decide on materials first of all. It is recommended to use pine, linden, oak for work. More difficult designs are made of glass and metal. Such materials are generally used for production of ladders without stair riser. Consider, steps has to fit into room interior well.
4. If in your house the floors are trimmed by tree, then it is the best of all to make steps of the raushpunt. To make rail-posts you need to stock up with bars of 50х50 in size. You can make handrail of block house. You should not forget about decorative elements also. You can get them in hardware stores.
5. Special attention ladder supporters deserve. Steps have to be fixed on bowstrings or on stringers. Big distribution was received by the first way. These designs happen to restrictive handrail and without them. Steps need to be cut directly in side parts of bowstring. Stringers have to be initially fixed to wall. In them there is special rectangular dredging in which steps are established. To make the stringer you need 2 bars of 100х300 cm in size. Mark arrangement of the stringer on wall. Apply the place of future provision of steps on supporting girder. Consider, this design has big weight.