How to make kayt

Kayt – is that other as kind of kite. Kayta are used as the kiting equipment that means driving on water, snow or sand at the expense of the pulling force of dragon. And whether it is possible to make kayt most? The answer – yes.

Instruction

1. To make kayt, you need rather big net area. Take curve of wing of the kayt and apply it to fabric (light polyester). In order that the curve did not slide, fix paper on fabric by pins. Now use the pulse soldering iron and cut part in duplicate.

2. Sticking together two parts, use double-sided adhesive tape 6 mm thick. Stick together halves of wings with an overlap of 6-7 mm.

3. Now take the reinforced tape and cut off piece 1.5 cm wide and 80 cm long, it to be necessary for strengthening of seam of backbone. Further you pristrochit tape from edge to edge of the kayt, when sewing make 3 seams "zigzag" at the edges and also on the center of tape.

4. Sew to regions of the kayt sew nylon thread and also use strong fabric for strengthening of edge of the kayt. Sew thread so that from below at the edges there was loop with a diameter of 10 cm. Now take dense waterproof fabric and double-sided adhesive tape, by means of them make front edge of the kayt (width of fringing of 6 cm).

5. At the edges of the kayt tuck 10 cm of fabric, it will help to strengthen edges. Further make pocket for attachment of fittings, for this purpose use very strong fabric 7 cm wide (the automobile seat belt can approach).

6. In pocket cut holes for T-connection (for this purpose use either the pulse soldering iron or the heated wire bent in the necessary form). Do not forget to strengthen by means of the same fabric size 2.5*7sm position of joints of slings, at the same time in each strengthening make three openings for sling.

7. Make openings at the edges of the kayt, place them in 5 cm from edge. Pay attention that at installation of armature there will be stopper ring there. Further do cuts of 5 cm in size for the lower and top connectors of guide.

8. Put the T-connector in the central cut of the kayt. Everything, further it is necessary only to insert armature and to record it.

Author: «MirrorInfo» Dream Team


Print