Now metal garages enjoy wide popularity. It is much easier to construct them, than garages of slag stone or brick. Also you will not need to flood the full-fledged base.
Instruction
1. The metal garage can be built on the platform which is flooded on height of 15-20 cm with concrete. In the course of filling on bottom it is necessary to install the metal gauze. The grid from armature is also often used for this purpose. This base will also act as garage floor. Construction of standard garage (3х5 meters) requires 2-3 cubic meters of cement slurry.
2. Independently it is senseless to build garage from metal. Now there are very many construction companies which provide precast or ready structures. Consider, the garage made of steel can quickly rust and give in to corrosion. Garages from galvanized steel are much longer operated. However such design more expensive also is. Such garages have collapsible design. For this reason it is quite easy to transport them. On installation to leave a little time. If it is necessary, then it can be moved to other place easily.
3. Warming of metal garage is carried out by the same methods, as well as warming of brick. You can use mineral wool or polyfoam for this purpose. Over heater often sew decorative tree. Also can be to use also other sheathing material. You can get already warmed garage, however will be to make warming independently cheaper.
4. At the moment there are designs in which mechanical and automatic gate are used. Mechanical is much cheaper. Besides, they are more easy-to-work. Automatic designs have high cost, but you should not close manually them and to open. However they have also shortcomings. The basic from them is the dependence on electricity. If in your house have cut off electricity, then you will hardly be able to leave on the car garage.