The hall, as well as theater, begins with hanger. Finished products can suit not absolutely you by the size, style or color. For the person without experience of production of furniture the hanger made with own hands will be the simple beginning for further independent work.
It is required to you
- - board;
- - abrasive paper;
- - varnish;
- - hooks;
- - self-tapping screws.
Instruction
1. Buy suitable board for your hanger. Consider some nuances: coniferous breeds lose durability over time and turn yellow under varnish, the abundance of knots will complicate work. Choose rather thick board about three centimeters wide. Process tree anti-septic tank which will protect material from rotting.
2. Estimate the sizes of future hanger in the place. Choose form of the panel necessary to you on which hooks will be recorded. It can be rectangular, oval, square, asymmetric or figured. Draw template on dense paper, cut it and once again try on on the place. Make necessary corrections and make the final drawing.
3. Apply finishing template to the dried ambassador of processing board and circle with pencil. The fret saw give to material the necessary form, work accurately, accurately on pencil line. Process the panel abrasive paper that there were no chips, hangnails and other defects. Grind tree along fibers, easily pressing nazhdachka fingers.
4. Round slightly the edges, so varnish will lay down more exactly. For this purpose envelop abrasive paper around the handle of the screw-driver or something similar, you hold this tool at an angle approximately in 45 degrees. There is special most fine wire contracted into hanks for grinding, but professionals still work with abrasive paper, being afraid of hit of parts of metal in tree. Over time these pieces can begin to rust and will spoil product.
5. Estimate your work with the help of old stockings or tights, carry out by them on tree. If they cling to the remained splinters, correct defects. Decorate the panel with the drawing which is burned out, pasted or executed by paints.
6. Well the products decorated in style decoupage look. It is very simple to make it: cut out the suitable picture from tissue or cotton fine fabric, paste pattern PVA glue. From above cover all panel with two varnish coats, doing between them the interval sufficient for drying.
7. Choose hooks on which you will hang up clothes. They can be metal or wooden, these products in great variety are on sale in hardware stores or in departments of furniture fittings. Accurately fasten them self-tapping screws on tree.
8. As hooks it is possible to use different objects if, of course, the style of your hall allows it. It can be the processed tree knots, the bent spoons, parts of toys and devices.
9. Beat your product in the hall and quietly hang up clothes.