As light and plastic material polyfoam was widely used not only in construction – it was appreciated also by those who are engaged in different types of hand-made articles. Polyfoam of white color in the natural form and in order that it completely corresponded to room decor, it it is enough to paint. And even the kid can paint any hand-made article to the taste.
Instruction
1. If polyfoam is located indoors, paint it by means of any water-based paint (for example, water emulsion). For this purpose buy paint of right colors and set of brushes in hardware store.
2. Check that on surface there was no dust. If necessary clean it with dry fabric.
3. Apply coat of paint on the surface of polyfoam, moving brush in one direction that there were no stains. Leave for some time that the coat of paint has dried up. Repeat the procedure, having put still coat of paint. If necessary, it is possible to put also the third layer.
4. Art coloring of the foam surface, will require set of gouache paints and set of art brushes. The basis will require aqueous emulsion ink which will perform function of basis for painting.
5. Prepare surface for drawing the drawing. For this purpose paint surface with layer of aqueous emulsion ink of basic color and leave paint at several o'clock before full drying.
6. By means of simple pencil apply contour of future drawing on the surface of polyfoam, circling template, or draw by hand if the template is not used.
7. Apply with brushes gouache on the surface of polyfoam according to the put drawing. Let's product dry well. If necessary repeat the procedure.
8. For drawing on polyfoam of masonry paints (if the product is outside of the room), apply on it at first protective layer from plaster to avoid dissolution of polyfoam under the influence of paint.
9. Apply plaster with thin layer on all surface of product and accurately distribute on all area. Wait until plaster dries up then to proshpaklyuyta.
10. Instead of plaster it is possible to use "liquid glass" which is applied with thin layer on the surface of polyfoam. In this case it is not necessary to putty surface.
11. Apply masonry paint on the prepared surface with brush, moving it in one plane. After paint drying, repeat the procedure 2-3 times depending on need.