Exterior of the car is, one may say, business card of its owner. Nacre paint deservedly is popular among motorists. The small translucent particles of iron mica located multilayeredly will give to your machine "iridescent" effect. How to paint the car with nacre?
It is required to you
- - painting gun;
- - base;
- - solvent;
- - varnish;
- - capacity under paint
Instruction
1. Buy necessary varnish and base under it. It is necessary to know that when coloring it is necessary to put with nacre under varnish the special pigment having certain characteristics. Before purchase it is necessary to consult with the specialist in kolerovka. In advance stipulate that you will separately take away base and the solvent which is invited to it, without mixing them.
2. Carefully process and degrease the painted surface. It should not be damp, rusty or oil. Do not touch the ground and degreased surface with hands. It is necessary to know that in order that new nacreous paint has well laid down on surface, coloring needs to be made at temperature not less than 15 degrees.
3. Part base with the solvent attached to it. As a rule, it is recommended to mix these substances in proportion 1:1. However it is right only in the conditions of the painting camera. In the conditions far from ideal, for example, in garage it is recommended to work a little differently. For drawing the first layer it is necessary to part base with solvent in the ratio 2:1. That is no more than 50 g of solvent have to fall on 100 g of base. So-called Sukhoi the layer will prevent emergence of various defects of coloring. Apply paint by means of painting gun. Wait 15-20 minutes.
4. Merge nacreous paint from gun in in advance prepared capacity and add to it residues of solvent. Put the second layer. Wait for drying and, if necessary, put some more layers.
5. Putting varnish happens according to the same scheme. The first layer - "Sukhoi". For its imposing it is recommended to reduce the amount of solvent specified in the instruction, twice. Put varnish coat and let's it dry out. Time of drying can fluctuate from 5 to 30 minutes depending on temperature conditions. The second varnish coat is put with solvent addition, according to the instruction.