When motorists decide to paint independently the car, they inevitably face need of polish of the applied paint. The same problem waits also for those who by own efforts do repair in the apartment. Polish - business troublesome and demanding certain skill.
It is required to you
- - polishing machine;
- - polish;
- - brushes and rags;
- - spray.
Instruction
1. Polish paint only after it is ground. Also you will need for this purpose the polishing machine, it is desirable with the pneumatic drive and the high-quality polishing pillow and also the polishing structure in number of one liter. It is necessary to stock up with brush to cause this polishing structure. At the final stage you need the bottle equipped with spray which should be filled with clear water. You hold all these accessories near at hand.
2. Gather by means of brush of 50-70 milliliters of the polishing structure and distribute it on the surface of paint in the square approximately in half of square meter the polishing pillow, but without turning on at the same time the polishing machine. For this purpose slowly move the polishing pillow, trying to cause structure with thin uniform film.
3. As soon as you achieve desirable result, turn on the machine. It is important not to press it during polish as it leads to what paint begins podplavlyatsya under the influence of big heat release. For the purpose of targeting of final gloss it will be better even to raise the polishing machine a little.
4. Gradually increase machine traverse speed. The movement at the same time have to be in the direction back and forth and also round in the polished area. As soon as the structure begins to evaporate, it is necessary to moisten surface with water by means of bottle with spray. These actions should be continued until gloss appears.
5. And now it is necessary to increase the speed of the polishing machine and to bring surface to condition of strong gloss. Small caution: in the field of keen edges polish paint, moving in the direction from edge. Otherwise you can erase paint from surface.
6. After polishing of paint is completed, it is necessary to remove its traces. For this purpose install on the machine instead of polishing pillow spongy pillow which will provide beautiful gloss after polish.
7. Then directly from bottle apply special means for removal of traces of polish on the processed surface. Distribute it on the area in half of square meter by means of the clean slightly humidified napkin. Wait until this means completely dries, and then remove its remains with clean rags. Only after holding this procedure, paint gains beautiful deep gloss.