Agree that sometimes household appliances break at the most inappropriate moment: for example, it is urgently necessary to wash, have turned on the washing machine, and it has suddenly begun to make sounds unusual for this unit (cracklings, pobryakivaniye). Really the washing machine has got rid of the life cycle? Do not panic. Perhaps, it is enough to replace several parts and the unit again will become operable. However to become the house serviceman of washing machines, you at least need to know how to remove pulley.
- - wrench;
- - pulley;
- - TENG;
- - drive belt.
1. If failure cause of the washing machine – the burned-down motor, then for elimination of breakage of the engine you, perhaps, need to replace brushes, the tachometer and pulley. For this purpose remove front or back cover of the washing machine (the fact is that each model has the features therefore in some models it will be necessary to remove the front panel, and in others - back). Then take off belt of the drive and disconnect the terminal strip from the motor. After that remove the motor and attentively survey it regarding damage of one of its basic elements.
2. In case on the washing machine TEN has burned down or the pulley has broken, this fault can be eliminated in house conditions too. Depending on model of the TEN washing machine can be located or in the field of its front side, or take place from unit rear side. So, remove the back or front panel of the washing machine, then accurately turn off spring of the suspender of tank of the washing machine and remove the drive belt. After that by means of wrench turn off nut which fixes pulley, remove it and pulley. To remove TEN, for a start remove wire from its terminals, then special key weaken fixing of this element and take TEN, having replaced it new. Carry out assembly of the washing machine in the return sequence.
3. The ability to remove pulley is useful to you and when it is necessary to execute replacement of belt. To replace belt, uncover the washing machine which provides access to this element. Then take off old belt, clean pulley from its remains and also check integrity of the part. If necessary execute its replacement (turn off the nut fixing pulley, remove part and on its place dress new). After that install the new drive belt. It begins to be put on with pulley.