The most vulnerable part of kitchen table and set is the table-top. Hot frying pans and pans, cutting of products without board, spots from products - all this spoils surface, and exterior of all kitchen as a result suffers. You should not change all set, of course, and here it is possible to repair and change table-top also most.
- - ceramic tile;
- - glue for tile;
- - finish for seams;
- - palette;
- - plastic crosses;
- - lever plitkorez;
- - polyethylene insulator.
1. Not to substitute constantly under kitchen ware of board and napkin, make table-top of ceramic tile. Such thing will serve to you much longer than wooden cover. Measure surface on which you will put tile. Consider that material successfully from the first will not always turn out to cut off and to break tile, having unintentionally dropped, it is possible. Therefore buy it a little more, than it is required. Choose material with smooth surface - on rough uneven dirt and fat can accumulate. The tile from porcelain tile has well proved to be.
2. Clean surface of table from small parts of the stratified chipboard with abrasive paper, dust also garbage, wipe with damp rag and dry. Dissolve tiled glue and smear it on table-top. That moisture did not get into the table-top basis, lay the special polyethylene insulator on adhesive layer. Miss the mark edges with silicone sealant.
3. Paste edge tiles at this stage of work. They happen in the form of borders or plinths, or just main tile which is cut off by the size. Paste the cut edge tile the factory party up. When side row dries and will well grab, begin to glue table-top tiles, accurately closing edges of edge tiles.
4. Arm with the palette and begin to spread table-top surface. Use plastic limiters (crosses) that seams between ranks were equal. The normal finish for seams will not be suitable for processing of seams of table-top. Various acids, vinegar for example, will destroy calcareous components. You need finish on the basis of epoxy resin. It is better to apply this material to special syringes for filling of seams.
5. Shortcoming such zatirok in their high price and complexity of drawing. It is possible to use structures for floor on the basis of cement. In them limestone is replaced with quartz. In three days fix the seams processed by this finish by special structure two times, with period of time at 12-24 o'clock. As a result of your work at you very beautiful and strong table-top will turn out and all image of kitchen will be updated.