Clean garage in which there will be machine - just dream for the motorist. And it can be done the hands. The room needs to give not only esthetic look, but also to find strong materials for finishing. If you have constructed solid brick garage, consider types of interior finish and choose suitable option.
It is required to you
- - cement;
- - sand;
- - antiseptic;
- - fireproof means;
- - plaster grid;
- - brush;
- - trowel;
- - tape measure;
- - pencil;
- - level;
- - plumb;
- - hammer;
- - drill;
- - screws (self-tapping screws);
- - nails;
- - timber dogs;
- - stapler;
- - rails for furring;
- - step-ladder.
Instruction
1. Pick up type of finishing. Selection of material for garage is limited to the main requirements: on fire safety, on durability and resistance to pollution. As flammable liquids will be stored indoors, pick up nonflammable finishing: wet plaster, ceramic tile, lining.
2. Trim garage with wet plaster. If the garage is laid out brick or foam-concrete blocks, use traditional method of finishing – plaster. It levels surfaces, forming strong covering which can be painted any color. At first remove dust from slots and jam roughnesses the same structure that it was used at laying of walls.
3. For the best coupling of materials use plaster grid - it will strengthen and will protect covering from clinking. Fix the reinforcing basis with the help nashlepok solution. Put the first layer of cement and sand solution 4-6 mm thick, and the second - 3-5 mm thick after hardening of the first. Pick up paint and cover with it the dried-out surfaces.
4. Buy lining for interior finish of garage. With its help it is possible to put the room in order quickly. At first fix on all surface uniform furring from wooden rails, observing vertical position of design by means of plumb.
5. As the tree is combustible material, process framework and lining fireproof means. Repeat the procedure 2-3 times as superficial impregnation is inefficient and the tree does not light up only within the first 10-15 minutes. If you use plastic panels, pick up fire-prevention liquid especially for this material. Sheathe walls and ceiling, reliably fixing each element on framework.
6. Make floor in garage. For this purpose use concrete, wooden boards, gravel with sand. Each of these materials demands additional treatment. For example, the emulsion from water and cement is applied on concrete, gravel needs to be stamped, and wooden floors are subject to obligatory coloring. That concrete floor did not raise dust, lay on it rubber, resistant to hostile environment, – it is elastic and resistant to abrasion. Stop the attention on paving slabs – it easily keeps within, just is under repair and is durable.