Polyfoam for walls of the house is used often - it is popular first of all thanks to excellent utilization properties. Material differs in big lightness, when mounting is not formed large amount of garbage, there is no dust and dirt. To cut out sheets to the necessary parameters, it is not required to buy the expensive equipment.
It is required to you
- - polyfoam plates
- - the gluing mix
- - cord for marking
- - semi-graters
Instruction
1. To install on facade of plates of polyfoam, for a start on wall carry out marking.
2. In the course of drawing marking define the upper bound and slightly below it fix iron profile on walls. It will help to arrange exactly plates on wall. When warming of facade by polyfoam the hands is spent at home, it is important to level well material - it provides good utilization properties.
3. At levels width should be chosen so that it was not less, than at polyfoam. After that on facade establish lighthouses.
4. Adhesive substance is applied on sheets of material. Then they should be strengthened on wall according to marking.
5. The next stage of technology of warming of walls polyfoam outside - reliable fixing of material. It is possible to use semi-graters for more dense pressing of sheets to wall. Between plates the distance should not be more than two millimeters. To have sheets as it is possible more exactly. The surplus of glue should be removed, at emergence of wide intervals they are closed polyurethane foam.
6. Carrying out warming of owner-occupied dwelling polyfoam, sheets in the direction from below up have. It is possible to place them in chessboard order or to displace each number of rather previous.
7. To continue work, it is necessary to wait when glue completely dries. Time of drying can differ depending on type of adhesive substance.