Anti-mosquito grids on windows are the modern invention which is effectively protecting the room from mosquitoes and other annoying biting insects flying in open windows and on balcony. There are different types and ways of fastening of anti-mosquito grids.
Types of mosquito grids
The anti-mosquito grid, depending on the size, design, geometry and mounting mode, is divided into rolled, frame, removable and sliding looks. In addition there are grids accordion pleats and also grids fastening by means of sticky adhesive tape or magnetic tape. Frame grids which do not complicate natural air circulation are the most widespread, do not demand special care, easily wash and easily are removed.
The framework of anti-mosquito grids is processed by special paint which gives it resistance to temperature differences and atmospheric precipitation.
Also rolled mosquito grids which represent box with roll of grid and its guides are not less widespread. For tension of rolled grid it is enough to lower of it by means of special level down and to record grid in the necessary situation. After use termination the grid cleans up back in box where it remains much longer, and the term of its operation significantly increases. Anti-mosquito grids do not influence the overview, are ecologically harmless and well protect from insects thanks to the strong and elastic cloth.
How to put mosquito grids on windows
It is the best of all to hang up mosquito grid in door or window opening where it will fulfill the purpose most effectively, protecting the room from mosquitoes and flies. For installation of cloth on metalplastic window it is necessary to measure its parameters and to buy four fixtures and on two self-tapping screws on each fixture. Apply grid to window aperture in absolutely equal situation, mark it pencil and attach angular fixtures on the center of window frame, observing equal distance between them. Attach angular fixtures on frame corners.
To provide to grid space for calling, mount the top fixtures the screw driver over its top corner, observing distance in twelve millimeters.
If you establish mosquito grid on balcony door, loops, mechanisms clips and special magnets will be necessary for you. Before installation at first mark pencil of the place of fastening of loops then record loops of self-tapping screws on window profile. Then attach cloth of mosquito grid to loops and record it the clip mechanism. In conclusion works install special magnets which will reliably press grid to window profile on self-tapping screws.