It is correct to make laminate laying not so simply. For this purpose it is necessary not only to connect correctly laminatny panels, but also to cut them so that they have perfectly fitted into room space. Otherwise it will be impossible to observe the traditional chess drawing of floor covering. Cutting of the laminated boards is the best of all to entrust one of hand or electrically operated hand tools, the benefit - the choice their rather big, and therefore to pick up the most suitable model will not make special work.
The tools intended for laminate cutting have to be convenient in application, compact and lightweight. In addition, they have to give opportunity of receiving ideally equal cut without any cracks and chips not to spoil laminatny boards upon termination of cutting. For many house masters this point, as a rule, is decisive.
Electrically operated hand tools for laminate cutting
It is necessary to distinguish from the most popular electrically operated hand tools by means of which it is possible to cut laminate: - electrofret saw; - circular saw; - the Bulgarian.ElektrolobzikEtot the tool allows to achieve the best results when cutting laminatny panels. This the easy, convenient tool in use, is ideal for master beginners.
Not to damage structure of laminatny board and to receive ideal cut, the cut it needs to be made on the maximum turns.
In use of the electric fret saw it is very important to choose qualitative file for laminate cutting. It differs in special form, way and step of distributing of teeths. Getting to work, the line of cutting is applied on the back surface of laminate by means of chalk or pencil then the board is stacked on table so that that part which is going to be cut off was in hover. The left hand it will be necessary to record the laminate lying on table, and in right to take the electrofret saw, and quickly to cut off excess part. The circular pilatsirkulyarny saw with disk on metal allows to receive beautiful cut on edge of laminatny board. But it is much more difficult to work with this tool, than the electrofret saw, and therefore it is not the best choice for beginners. To make laminate cutting by circular saw, it needs to be laid on firm surface, face up, and to fix. It is necessary to cut very accurately, slowly advancing disk on the drawn line. At the same time it is undesirable to slow down on one place. The Bulgarian (grinder) the Bulgarian – generalpurpose tool which each house master has to have. With its help it is possible to cut a lot of things including laminate. Lack of use of this tool is only large amount of dust which is marked out when cutting laminatny board. Therefore it is the best of all to be engaged in this work on the balcony or on the street. That the edge has turned out beautiful, and on it there were no cracks and chips, it is necessary to cut laminate the Bulgarian only from face side.
Hand tools for laminate cutting
As the hand tools used at laminate cut most often apply hacksaw and construction knife. NozhovkaPri lack of electrically operated hand tools can saw laminate by means of normal hacksaw. At the same time it is the best of all to use hacksaw with smaller teeths.
The hacksaw can be used at the small volumes of work. It is undesirable to apply it to cut of large number of laminatny boards as on it a lot of time and forces will leave.
Construction the knife nozhispolzovaniye for cutting of laminate is possible only when it is necessary to cut off only one board, and, for example, the Bulgarian or saw has broken. To receive more or less equal cut, the laminatny board keeps within on firm surface face up then on it it is necessary to put ruler and to carry out on it the deep machine cut. Holding board on the one hand, it is necessary to pressure the second therefore laminate to break. The choice of tools for laminate cutting big. It is possible to make high-quality cutting of laminatny board anything, only the amount of the spent time and forces at the same time will be miscellaneous, and therefore when choosing any given tool it is necessary to be guided only by the preferences and requirements.