Today many people, and not only living in the house install a satellite plate which allows to watch many different channels. Of course, it is possible to call the expert and to get a ready job, but if you are not afraid of handwork and though you understand the equipment a little, then it is possible to make all the hands. If you are interested how to adjust a plate, then use the submitted instruction which will be suitable for a plate with three converters.
One of the main advantages of satellite television – its price. Having made, one payment will not need to be allocated when using money for a monthly fee. One more plus of a plate – high quality of the picture and a sound. Depending on the chosen satellite, on the equipment with three converters, it will be possible to adjust from 25 to 40 channels.
How to adjust a satellite plate?
It is important to hang up and attach correctly the equipment, otherwise no control will allow to achieve good result. In our example, the plate is sent to South side and all wires are attached. After that it is possible to pass to shoot, that is to setup of the antenna. We begin with the central head as it is main. It is important to know on what satellite it is better to adjust a plate to catch the correct signal. In this case we choose Sirius and in a receiver establish frequencies – 11766, speed – 27500, and polarization on N. On a receiver it is possible to see two strips:
- On the first it is possible to judge connection of a plate and also a signal. Most often it is painted in red color.
- The second is shown signal level. Most often it is painted in yellow color.
If the antenna was correctly connected, so the level of a signal will show approximately 40%.
It is important to know how independently to adjust a satellite plate, to be exact quality of a signal as at the moment it is on a zero indicator. It is necessary to turn the antenna to the left and up to an emphasis, and then, move in the opposite direction. Move slowly to find, where exactly best of all catches a signal. In that case if it was not succeeded to adjust a signal, so it is necessary to lower a plate by 2-3 mm on fixture. That it was convenient to carry out conceived, on a bracket especially for this purpose there are marks with figures. Repeat process with turn of the antenna to find a signal. In case you could reach the desirable, then on a receiver it will be possible to notice emergence of a yellow strip. The task is in that the level of a signal was 40%.
It is important to adjust most precisely a plate on the satellite as any bad weather, can lead to the fact that the signal will be lost, and, therefore, and viewing telecasts will be impossible. To increase quality of a signal, it is necessary to turn the converter at first clockwise, and then, against it. You watch in what situation the percentage value will increase. By the way, if fastening allows, then for improvement of quality of a signal, it is possible to try to bring closer the converter to a mirror, and after that to alienate him. To have an opportunity to watch TV during bad weather, it is necessary to adjust quality of a signal on value of 65-70%.
Now we will understand as most to adjust a satellite plate, namely side converters. The principle of control is identical, only the receiver needs to be programmed on Amos, at the same time value of frequency – 10722, speeds – 27500, and polarization on N and Hotbird (frequency – 11034, speed – 27500, and polarization – V). After that repeat manipulation with turn of brackets, you will not catch a desirable signal yet.