The cellar is available in any private house, it is convenient to store tinned and fresh vegetables and fruit, other food in it. However, such construction is more subject to moisture influence, especially if ground waters absolutely nearby lie. How to make a cellar waterproofing from ground waters, it will be told in this article.
How it is correct to make a waterproofing in a cellar?
For internal waterproofing finishing of cellars bitumen or mastic, the getting waterproofing, a waterproofing of membrane type and on the basis of cement are used. Whatever way was chosen, previously the cellar needs to be equipped with a lock opening on the one hand, and with other air-conducting pipe which is looking out outside. Those who is interested as it is possible to make a cellar waterproofing hot bitumen or mastic should answering that at first walls need to be plastered and made on a floor a cement coupler. Two layers of material 2 mm thick are consistently put. Before full drying of each of them the surface needs to be strewed with dry sand.
Those who asks how to make a cellar waterproofing from within the getting structures like Penetron, Aquatron and others should answering that at first from a surface it is necessary to remove dust and dirt, cement pieces, and capillaries of concrete can be opened if to scratch it a metal brush. Further to humidify walls and a floor and to start causing the main structure. On completion of works the surface needs to be humidified some more days.
When drawing a waterproofing of membrane type which is called liquid rubber at first all surfaces need to be vyrovnit, cleaned them from dirt and garbage and to cover with primer. Having well mixed structure liquid rubber, the pallet, to apply with the roller or a brush it on a surface, well coating cracks, hollows and all roughnesses. As soon as the structure grabs, it is possible to put finishing materials on glue. During the work with cement and polymeric solution to remove the remains of an old cement covering from a surface, to humidify walls and a floor and to start hashing of powder and an emulsion of which cement and polymeric mix consists. A brush or the gear pallet to process a surface and as soon as the first layer dries, to put the second.
How to make a floor waterproofing in a cellar?
Most often it is carried out with use of sheet or rolled materials. After preliminary clarification of the processed surface the primer layer is put, and after that stack rolled bituminous materials or sheet polymers, for example, roofing material or roofing felt. Such materials keep within layers, and for their gluing hot bitumen or primer is used.